Our range of straight-line edging machines counts a huge number of models, divided into some major lines: AL M, TL, TLR and TLS series.
The AL M range includes small-middle sized straight-line edging machines from 5 up to 10 wheels for the processing of the flat edge with arris or with variable angle.
The TL range includes models of middle-big sized straight-line edging machines for the flat edge with arris or with variable angle from 10 up to 11 wheels.
The TLR range, which is the most used by the major producers of stratified glass for the heavy building industry in the Northern Europe, is addressed to all glaziers with huge production of glasses with a great thickness.
The TLR series for the processing of flat edge with arris includes models from 10 to 14 wheels, while the variable angle models are available from 11 to 13 wheels.
At last the TLS range, which represents an evolution of our TLR edging series, includes models from 13 to 16 wheels for the variable angle, able to carry glass sheets with a weight up to 1.500 Kg and with a thickness up to 100 mm.
All Adelio Lattuada models offer an optimal duration/cost ratio. This is a very important characteristic that is always fundamental for glassworks because of their need of machines with a long working life. In fact, there are Lattuada machines still working after 20 years and with up to two million metres processed, while the average working life is normally about five to six years if quality and production levels have to be maintained.